DSP TP104-plus Dokumentacja Pobierz pdf (Strona 89)

5-5

Remote Programming

INPUT and FILTER COMMANDS

ISRC (?) {i} The ISRC command sets or queries the input configuration. The parame-

ter i selects A (i=0), A-B (i=1), I (1 MΩ) (i=2) or I (100 MΩ) (i=3).

Changing the current gain does not change the instrument sensitivity.

Sensitivities above 10 nA require a current gain of 1 MΩ. Sensitivities

between 20 nA and 1 µA automatically select the 1 MΩ current gain. At

sensitivities below 20 nA, changing the sensitivity does not change the

current gain.

IGND (?) {i} The IGND command sets or queries the input shield grounding. The

parameter i selects Float (i=0) or Ground (i=1).

ICPL (?) {i} The ICPL command sets or queries the input coupling. The parameter i

selects AC (i=0) or DC (i=1).

ILIN (?) {i} The ILIN command sets or queries the input line notch filter status. The

parameter i selects Out or no filters (i=0), Line notch in (i=1), 2xLine

notch in (i=2) or Both notch filters in (i=3).

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 177 178

Brak uwag

DSP TP104-plus Dokumentacja Strona 89